JIMI Cloud Dash Camera
Connect Vehicle with People 

JIMI JC100 Cloud Dash Camera
Live view your vehicle on smartphone 
from anywhere anytime

JC100 Specs & Main Features

JC100 is a GPS, WIFI, 3G and G-sensor cloud dash camera, with a good selling record in AU, USA, UK and middle east. The stability and quality of both dash camera and app (car-matrix) have been proven. CE, FCC certificated.

CPU: ARM Cortes A7 Quad-Core 1.3GHz
WIFI: 802.11 b/g/n,  Frequency 2.4GHz, Hotspot
GPS: Internal GPS, location accuracy < 10 meters.
OS: Android 5.1
Flash: eMMC Flash 8G
Ram: DDR3L 1GB, Frequency 533MHz
Band: GSM 1800/1900, WCDMA 1900/2100, HSPA+(21Mbps), EDGE
Motion: G-Sensor BAM233 / BAM250
Others: Built in speaker and microphone.

Forward: Full HD 1080P, FOV 140°, F2.0. True Color.
Inward: HD 720P, FOV 90°. Night Vision, Black & White.
6G Glass Lens.

Loop Record: Support Max 32Gb TF card, automatically record when ACC on. Video is cut to 3 minutes a piece, 120mb, 1080p.
Local Event Record: Event video are saved in EVENT File in TF card, cannot be overwritten by normal non-event video.
Upload Event Recod: By settings, JC100 can automatically record and upload event video to cloud server. Meanwhile user will rreceive message alert notification.

Q: How much data JC200 consume one month.
A: Besides GPS Tracking data cost 5Mb to 30Mb a month. The main data consumption as below, live video, remote video and remote photo. The three functions only will be executed when user request on app.
Data consumption as below.
Both forward & backward cameras are 60KB/second @ 640 X 352 MP4.
Forward Cam 14MB/10 sec @ 1920 X 1080 3GP.
Backward Cam 364KB/ 10sec @ 640 X 352 3GP.
Forward Cam 1.8MB @ 1920 X 1080 PNG.
Backward Cam 100KB @ 640 X 352 PNG

JC100 Key Functions

Monitor your vehicle from anywhere, using your smartphone

  • Live Stream: 
    View and Record the live video feed from both inside and outside your vehicle.
  • GPS Tracking: 
    Track your vehicle wherever you are with the JC100 built in GPS. And the Tracked routes can be saved on cloud server for later checking.
  • Two-Way Communication: 
    Use the built in speaker to communicate with whoever is in your vehicle.
  • Car Battery Protection:
    The JC100 can detect the car battery voltage. If car battery is low, JC100 can stop stealing from car battery, in order to avoid draining car battery.
  • Anti-theft alarm:
    Watches over your vehicle when it is parked and alerts you via your cellphone if the G-Sensor is triggered (Vibration detected).
  • WIFI Download: 
    Allows you to connect your cellphone to the JC100, giving you the ability to transfer and review your recorded footage.
  • WIFI Hotspot: 
    JC100 can sharing sim 3G cellular network through WIFI hotspot, allowing you to connect your cellphone with WIFI hotspot to surf internet.
  • G-sensor: 
    Sensitive in detecting impact. Immediately send alert notifications to your smartphone and  saves the footage so it is not recorded over.


    Front Facing Full-HD Camera and Internal Cabin Camera. Front camera records the road, whilst the cabin camera records inside the vehicle.
    Connected to the 3G network, use your smartphone to view live video/photo from front and rear cameras from anywhere you can get network access.
    Via the open App, receive notification of car movement outside the Geofence or in the event of an accident or incident if the GPS sensor is activated.
    Remotely view live footage from both the internal and external cameras using your smartphone. Communicate via the 2 way radio with anyone inside your vehicle. Differs from REMOTE VIDEO below, live view doesn’t have a time limit.
    Differs from LIVE VIEW (live stream/ real time video) above, remote video is that user request remote video on app, device will immediately record and upload a seconds long video to cloud server, where user can download on smartphone app or web platfrom.

JC100 download

JC100 Package & weight

Box size: 14.5*6*15.5 cm
Box weight: 456g
Carton Quantity: 20 units
Carton size: 32*31*32 cm
Carton weight: 10 KGS

JC100 Trouble-Shooting

1.) Check if the IMEI in server, by asking your seller.
2.) Check if the sim card has data service and credit. You can call the sim card or ask carrier after-sales hotline.
3.) Becasue your sim card is not within APN auto-configure database. So need you manually set APN by PC or SMS command. This is the most usually reason why device cannot get online.
4.) Mind that first time device need move in open-sky area to get GPS locatated, in order to login platform.

This voice means something went wrong. Mostly because the SD card memory has problem. Before you insert SD card, please delete all saved data or format to FAT32, and at least to make sure it is at least 8GB available. 

First of all, JC100 only push WIFI when ACC is ON. In smartphone settings -> WLAN, connect device’s wifi, the password is the last 8 of the IMEI.
In CarMatrix app -> Media Center -> Media Sync. User can view and download video and photo saved in SD card.

  • Use PC software to get JC100 Screen. We have PC USB cable for JC100 connect with PC.
    This is very useful to set APN, much easier than set through SMS command. 
    This link shows how to use Vysor to set APN on PC.
    Please mind the operation in manual above link carefully: “ After install the driver ,Turn on the device and connect to PC with USB data cable ”

JC100 Q&a

It depends how often you request remote video, live stream and remote photo. 
Data consumption as below.
GPS Real-time Tracking: 5mb to 30mb per month.
Three below only cost data when user request on app.  
LIVE VIDEO: Both forward & backward cameras are 40KB/second @ 640 X 352 MP4.
REMOTE VIDEO: Both Cameras are 1.4 MB/3 seconds @ 640 X 352 3GP.
REMOTE PHOTO: Both cameras are 700 KB per photo @ 1920 X 1088 PNG.

No, JC100 won’t record when ACC off. But if any strong impact detected by G-Sensor, alert will be triggered. immediately JC100 sends message notifications to your smartphone. Meanwhile JC100 will record seconds footage into TF card. By settings, user can choose to record and upload a seconds video to cloud, instead of saving in local TF card.

WIFI hotspot name is device’s IMEI, a serial numbers. The password is the last 8 of the IMEI.

No, it doesn’t. Your smartphone get device SD card video through WIFI, doesn’t cost any 3G/4G data.

Yes not a problem. And it is free for certain order quantity. 

No, you cannot. Because video saved in SD card is too big size, a 3 minutes 1080p is 120MB. If transfer such big file through 3G, will cost lots of data and quite long time to complete the transfer, even possible to fail to transfer. It will cause lots of aftersales problem and bad user experience.

Yes, we can customize firmware for your requirements. We have our own developer teams for ODM.

This is a good question. JC dash cams are new and a time 4G even 5G smartphones have been go popular. We have considered to use 4G module on JC, but for reasons below, we decided to use 3G module.
1. JC dash cameras are not smartphones, they are dash cameras with specified functions. The most important is to ensure a smooth live video, both of our JC100 and JC200, only need 60KB/sec when do live stream, and 3G bandwidth is very capable for such light data transit. The minimum of WCDMA speed is 200KB/sec, average WCDMA is 0.1MB/sec, HSPA is 1.5MB/sec to 7.2MB/sec, can ensure perfect live stream/ remote video/ Remote photo on JC100 and JC200.
2. Based on point one, that 3G is super capable for JC dash cameras. We consider no need to use 4G module, because 4G hardware is more expensive than 3G, but customers pay more for what they don’t need in the first place.
3. Despite in many countries 4G working well, but still many places even in developed counties or developing countries, the 4G still not stable and doesn’t cover enough areas. While 3G as a mature network, and its stations have been built for a long time, which makes 3G even cover more areas and more stable.
4. The most important is that in many countries such as USA, UK, and AU, our JC100 selling good, which has proven that JC100 is very smooth over 3G. And when 4G or 5G become main stream network, replacing of mature main-stream 3G network, we need to switch 4G or 5G as well.

Yes, we are. There are two 4G dash cameras under developing. As our plan, the 4G dashcam (without screen) will launch in Oct, 2018. While another 4G dashcam (with screen) will launch in the end of 2018. In future, we will develop more complex models, which are 4G or 5G.

No, JC100 does have dual cameras but only single record at the same time. The front camera records automatically when ACC on. While the incab camera record when User send request on smartphone app or web platform.
The reason why it is not dual recording at the same time is that some drivers don’t want to record incab for privacy. And singal recording does save TD card memory.
If you are looking for dual recording at the same time, please have a look at our JC200, which is dual-channel recording at the same time

Is the ACC on? WIFI hotspot only can be activated when ACC on.

No, device WIFI download works even there is no sim card installed. The only requirement is need device power on and ACC on, for WIFI download function.

Footage can be transferred to smartphone through WIFI hotspot. Steps: first, connect smart phone with JC100’s WIFI hotspot. Second, open car-matrix smartphone app, and enter Media Center. Then user can browse, view and download footage files saved in TF card.

First JC100 only record front camera video into SD card, and it is 1080P. A 3 minutes video is 120MB, 1 minute video is 40MB. 32 GB equals 32,000 MB,  can save 32,000/40, equals 800 minutes. Approximately 13 hours.

Commercial Guide

First please download and install car matrix on appstore or google play. Web platform url: http://www.car-matrix.com. There is a demo button on login page, but we cannot assure if there is any available dash cam because too many live video requests from testings.
So please contact Technician by email or by Skype to ask for a live test and tech support. We will set a dash cam online only for you and send you account and password to log in.

There is no quantity limit for trial order, you can order 1 unit. Normally we send by express like DHL, aramex. Process: 
1. Confirm model and quantity.
2. We make an proforma invoice, which covers products details, price, quantity, delivery, payment. To complete the PI, also we need you to provide consignee info such as Consignee name, phone, address, VAT (if needed by your Customs), Company name (optional), Postcode.
3. After receive your payment as proforma Invoice. We will send products and give you delivery tracking No.

We do have a sprad pricing depending on quantity. For details, please Ask for price  by Skype, or By Email.

Wrapper. It is a wrapper on white box packing. We provide service for customizing wrapper with your logo and design.
Platform both web & app.  They can be branded as well. 

Normally we have enough inventory as a manufacturer. But for ensuring a fast shipping, you may need ask us inventory. Or tell us your order plan, so we can manufacture in advance.


Any inquiry, please feel free to contact. Beside standard products, Concox & Jimi are good at ODM.
Occasionally Concox & Jimi have promotions on several models. For e.g. for 200 units order, send some units for free as gifts.

E: daniel.su@jimilab.com
Whatsapp: +86 186 1706 3756
Skype: danielsuxin
Official site: www.jimilab.com / www.iconcox.com

Prompt response is assured within 24 hours once receive your message.

Please read Privacy PolicyBefore leave your private information.

[contact-form-7 404 "Not Found"]
Close Menu
Translate »